MAW Solutions Ltd    Hanworth TW4 5PY   Phone: 01273 493343   
Email: info@mawsolutions.com

LOW LEVEL COOLANT ALARM KIT  - Part No. 1035

The Updated Low Coolant Level Alarm Kit will monitor your engineís coolant level and will immediately alert the driver should a low coolant situation develop. This digital monitor, which can be simply mounted in the driverís compartment, boasts three choices of audible alarm patterns plus the facility to trigger louder external alarms such as your car horn.
LowCoolantAlarmpic2
The alarm is a cost-effective, efficient low coolant early warning protection device which very few vehicle manufacturers supply as standard equipment. It accurately monitors coolant level in any engine, and has an in-built electronic surge delay recognition to help prevent false alarms.

Conventional engine temperature gauges do not have audible alarms and may not detect initial coolant loss. A split radiator or hose will cause sudden coolant loss, resulting in rapid temperature rise and the possibility of extensive engine damage. In some cases a gauge may actually show a temperature drop after sudden coolant loss. Only a coolant level alarm will properly highlight a problem before itís too late.

LowCoolantAlarmpic1

The Kit consists of:


Compact electronic alarm module
     (size 120mm x 80mm x 25mm)
Mounting pad
Nylon in-line sensor adaptor
Wiring looms
Hose Clamps
Rubber sleeve adaptors
Installation instructions

 

LowCoolantAlarmpic3

 

 

      The alarm sensor simply fits into the engineís top radiator hose using the supplied adaptor.

 

 

         TECHNICAL SPECIFICATION

Operating Voltage

12-volt or 24-volt

Fits Hose Sizes

32mm to 40mm

Display Type

4x LEDs: Power On
                 Buzzer On
                 Fan On/Off Indicator
                 Remote Mount LED

Fan Operation Monitor

Yes  - LED On/Off

Audible Alarm

Yes  - 3 Buzzer Rhythms
  (Single, double or triple beep)

Coolant Level Sensor (nylon)

Yes  - with Electronic Coolant Surge              Delay

External Device Activation

Yes  - Can control an external relay to activate or deactivate ignition or an external alarm

Start Up

Yes  - Flashes LED and alarm at every set-up